Whiteley XPOLY8 Floor Stripper - Fast Acting Sealer Remover for Multiple Floors

Floor Stripper for Quick Sealer Removal - Fast Acting Formula for Minimal Scrubbing

Whiteley XPOLY8 Floor Stripper 5L is the ideal solution for removing old floor sealers and finishes with minimal effort. Designed for use on a variety of floor types, this powerful formula liquefies and emulsifies floor finishes, making it easy to remove with an auto-scrubber or mop and bucket. Whether you’re working on vinyl, terrazzo, or ceramic, XPOLY8 delivers fast results, saving you time and energy.

High Performance Floor Stripper for Quick Sealer Removal

• Efficient Removal: Effectively removes both metalized and non-metalized floor finishes.

• Versatile Application: Suitable for use on vinyl, terrazzo, marble, ceramic quarry tiles, rubber, no-wax linoleum, and more.

• Minimal Scrubbing: Designed to liquefy old finishes for quick and easy removal, reducing manual labor.

Effective on Multiple Floors Including Vinyl & Terrazzo

• Fast Acting: The glycol solvents and dual-chain emulsifier rapidly break down stubborn old sealers.

• Quick Penetration: XPOLY8 penetrates and emulsifies old floor finishes within minutes.

• Reduced Scrubbing Time: Helps save time by reducing the need for excessive scrubbing, speeding up the stripping process.

How to Use XPOLY8 for Easy & Efficient Floor Stripping

• Preparation: Sweep or vacuum the area to remove loose debris before application.

• Dilution: Dilute according to the level of build-up, as per the product label.

• Application (Auto-Scrubber): Fill the auto-scrubber with the diluted solution and apply to the floor.

• Application (Mop and Bucket): Generously apply the solution using a mop.

• Dwell Time: Allow the solution to sit for 5-10 minutes to fully emulsify the old sealer.

• Agitation: Use a floor machine with a stripping pad for any tough areas.

• Removal: Use an auto-scrubber or wet vacuum to remove the emulsified sealer.

• Rinse: Thoroughly rinse the floor with clean water to remove any residue.

Safety Information

• Ventilation: Ensure good ventilation during use to avoid inhalation of fumes.

• Protective Gear: Wear rubber gloves, safety goggles, and protective clothing to prevent skin and eye contact.

• Storage: Store in a cool, well-ventilated area, away from incompatible materials.

• First Aid:

  • Skin Contact: Wash thoroughly with soap and water.

  • Eye Contact: Rinse immediately with plenty of water and seek medical attention if needed.

  • Inhalation: Move to fresh air and seek medical advice if symptoms persist.

Environmental Impact

XPOLY8 Floor Stripper is formulated with biodegradable ingredients and is free from phosphates, ensuring it complies with environmental regulations and minimizes its impact on the environment.

XPOLY8 contains a blend of glycol solvents and a dual-chain emulsifier, which work together to rapidly penetrate and break down stubborn old polish films.
This allows for easy removal of floor sealers, saving time and effort in floor maintenance.
High Performance: Efficiently removes both metalized and non-metalized floor finishes, making it versatile for various floor treatments.
Fast Acting: Liquefies old sealers and finishes on contact, enabling quick and easy removal.
Effective on Various Floor Types: Ideal for use on vinyl, rubber, no-wax linoleum, marble, terrazzo, ceramic tiles, and more.
Easy to Use: Compatible with auto-scrubbers or mop and bucket for minimal effort and labor.
Low Odor: Formulated to ensure a more pleasant working environment during use.

Depending upon the degree of sealer on the floor, XPOLY8 can be diluted as follows:
Heavy Build up: 250mL/L of water
Moderate Build up: 125mL/L of water
Add recommended amount of XPOLY8 to cold water and apply liberally to the floor. Allow to work for 3 to 5 minutes,
being sure to keep the floor wet. CAUTION: Floor will be slippery when it’s wet. Scrub the floor using a black pad.
Pick up the dissolved sealer. Rinse the floor with clean water and allow the floor to dry.
Note: Avoid prolonged contact with metal surfaces
Application:
Auto-Scrubber: Fill the auto-scrubber with the diluted solution and apply it to the floor.
Mop and Bucket: Apply the solution generously using a mop.
Dwell Time: Allow the solution to sit on the floor for 5-10 minutes to penetrate and emulsify the old sealer.
Agitation: Use a floor machine with a stripping pad to scrub the floor, if necessary.
Removal: Remove the emulsified sealer using an auto-scrubber or a wet vacuum.
Rinse: Rinse the floor thoroughly with clean water to remove any residue.

Download PDS

Download SDS

Safety Instructions:
Ventilation: Ensure adequate ventilation during use to avoid inhaling fumes.
Protective Gear: Wear rubber gloves, safety goggles, and protective clothing to avoid skin and eye contact.
Storage: Store in a cool, well-ventilated area away from incompatible materials.
Emergency Measures:
Skin Contact: Wash thoroughly with soap and water.
Eye Contact: Rinse immediately with plenty of water and seek medical attention.
Inhalation: Move to fresh air and seek medical advice if symptoms persist.
ENVIRONMENTAL STATEMENT:
Whiteley manufactures products that comply with Australian and International environmental policy. Whiteley aims to
ensure that every product is 100% biodegradable, whilst achieving optimal performance and benefit to customers. All
Whiteley products are supplied in 100% recyclable containers. Whiteley and its staff are fully committed to ensuring
that our environment and those international environs in which our products are used are enhanced by the use of
technology, and that these environments are preserved for the enjoyment of future generation