Agar G Solve Oil and Gum Remover for Spot Cleaning 5Lt

Why Agar G-Solve Is an Effective Spot Cleaner for Tough Oil and Solvent Based Stains

Agar G-Solve is a professional strength citrus solvent cleaner designed to remove stubborn oil based and adhesive type stains that standard detergents cannot dissolve. It is formulated to break down chewing gum, oily residues, tar, ink, paint, and adhesive marks across carpets, hard floors, tools, and equipment. The fast acting, water-rinsable formulation makes it suitable for commercial cleaning, maintenance teams, and workshop environments where effective spot treatment is essential.

How Agar G-Solve Breaks Down Gum Oil and Adhesive Residues

G-Solve works by penetrating and dissolving sticky, oily, and resin based contaminants at a molecular level, allowing them to be lifted away from the surface rather than smeared or spread. Once the residue is loosened, it can be wiped or rinsed away using water, leaving surfaces clean without greasy residue. This makes it particularly effective for spot cleaning in high traffic areas and problem stain removal.

Please Note: G-Solve CAN'T be Shipped outside of Victoria.

Key Benefits of G-Solve 5L

• Removes chewing gum tar oil paint grease glue and ink
• Works on carpet tiles vinyl metal and hard flooring
• Dissolves residues fast for easy scraping and wiping
• Rinses with water and leaves no residue behind
• Made with biodegradable renewable citrus solvents

Where to Use G-Solve

G-Solve 5L is ideal for maintenance teams cleaners and facilities managers working in offices schools hospitality venues and workshops

Recommended Applications

• Spot cleaning gum and tar on carpet and entryways
• Removing adhesives oil and paint from vinyl and plastic
• Cleaning grease from tools machines and workbenches
• Lifting stains from stainless steel tiles and concrete
• Erasing ink and marker from surfaces in print rooms

How to Use Agar G-Solve 5L

1. Test in an inconspicuous area before full use
2. Spray directly onto stain or apply using a cloth
   
3. Allow 2 to 5 minutes of dwell time
   
4. Blot scrape or wipe off the loosened material
   
5. Rinse with water or an extraction detergent if on carpet
   
6. On chewing gum pierce with knife to assist penetration
   

Application Instructions:

  Carpet Spotting:

• Pre-Test: Ensure that no colors run by testing G-SOLVE on a small, inconspicuous area first.
• Application: Apply G-SOLVE to a clean, pale-colored cloth and dab the stain, working from the edge towards the center.
• Blot: Use a clean cloth or towel to blot the stain.
• Rinse: Flush with clean water or use an extraction detergent (EXIT or CITRUS EXTRA) after pre-spotting.

Removing Adhesives or Chewing Gum:

• Scrape: Remove excess material from the surface.
• Apply: Pour G-SOLVE onto the residue and allow it to penetrate.
• Scrape: Work in with a scraper to lift off the gum or adhesive.
• Rinse: Remove any remaining residue with more G-SOLVE and rinse with water.

Felt-Pen Graffiti:

• Test: Check G-SOLVE compatibility on a hidden area.
• Apply: Spray G-SOLVE directly onto the graffiti and wipe off immediately.

Clothing:

• Spot Treatment: Spray collars, cuffs, and stains with G-SOLVE.
• Launder: Wash clothing as usual.

Industrial Cleaning:

Application: Use G-SOLVE to remove oil, grease, tar, and other oil-soluble stains from metals, paintwork and hard surfaces.

Safety and Cautions:

• Slip Hazard: G-SOLVE may make floors slippery until rinsed off.
• Surface Compatibility: May attack some rubber and soft plastic surfaces; always test before use.
• Tar Backed Carpet Tiles: Do not use on tar backed carpet tiles, as it may dissolve the backing and cause tar stains.
• Residue: Always rinse out G-SOLVE, as it contains detergent ingredients that can leave a residue if not properly washed away.

Safety Information

• G-Solve is a flammable Class 3 liquid and must be kept away from ignition
  
• Wear gloves and avoid inhaling vapours
  
• Use with good ventilation
  
• Eye Contact: Rinse thoroughly for 15 minutes with water
  
• Skin Contact: Wash with soap and water
  
• Ingestion: Do not induce vomiting. Seek medical attention
  
• Store sealed in cool dry place
  
• UN 1993 Flammable Liquid PG III HAZCHEM 3[Y]

Environmental Care

• Formulated with biodegradable terpene oils from renewable sources
  
• Free from phosphates and safe for disposal with proper rinsing
  
  

Heavy-Duty Stain Removal – Targets stubborn grease, oil, tar, and adhesive stains.
Multi-Surface Use – Safe for carpets, fabrics, and hard surfaces.
Fast-Acting Formula – Quickly breaks down tough stains for easy removal.
Professional-Grade Cleaning – Ensures a deep clean, leaving surfaces stain-free.
Ideal for Pre-Spotting – Prepares surfaces for thorough rinsing or washing.

Carpet Spotting:
Pre-Test: Ensure that no colors run by testing G-SOLVE on a small, inconspicuous area first.
Application: Apply G-SOLVE to a clean, pale-colored cloth and dab the stain, working from the edge towards the center.
Blot: Use a clean cloth or towel to blot the stain.
Rinse: Flush with clean water or use an extraction detergent (EXIT or CITRUS EXTRA) after pre-spotting.
Removing Adhesives or Chewing Gum:
Scrape: Remove excess material from the surface.
Apply: Pour G-SOLVE onto the residue and allow it to penetrate.
Scrape: Work in with a scraper to lift off the gum or adhesive.
Rinse: Remove any remaining residue with more G-SOLVE and rinse with water.
Felt-Pen Graffiti:
Test: Check G-SOLVE compatibility on a hidden area.
Apply: Spray G-SOLVE directly onto the graffiti and wipe off immediately.
Clothing:
Spot Treatment: Spray collars, cuffs, and stains with G-SOLVE.
Launder: Wash clothing as usual.
Industrial Cleaning:
Application: Use G-SOLVE to remove oil, grease, tar, and other oil-soluble stains from metals, paintwork, and hard surfaces.

Download PDS

Download SDS

Safety and Cautions:

G-Solve is a flammable Class 3 liquid and must be kept away from ignition.
Wear gloves and avoid inhaling vapours.
Use with good ventilation.
Eye Contact: Rinse thoroughly for 15 minutes with water
Skin Contact: Wash with soap and water
Ingestion: Do not induce vomiting. Seek medical attention
Store sealed in cool dry place
UN 1993 Flammable Liquid PG III HAZCHEM 3[Y]
Slip Hazard: G-SOLVE may make floors slippery until rinsed off.
Surface Compatibility: May attack some rubber and soft plastic surfaces; always test before use.
Tar-Backed Carpet Tiles: Do not use on tar-backed carpet tiles, as it may dissolve the backing and cause tar stains.
Residue: Always rinse out G-SOLVE, as it contains detergent ingredients that can leave a residue if not properly washed away.

Environmental Care:

Formulated with biodegradable terpene oils from renewable sources
Free from phosphates and safe for disposal with proper rinsing