Agar 3D Gloss Crystal Clear Floor Polish Finish for Vinyl Timber and Stone Floors 5L

Agar 3D Gloss is a crystal clear floor polish designed to deliver a high gloss finish on vinyl, sealed timber, and stone floors. It is formulated for busy commercial environments where durability, appearance, and safety are essential. The polish forms a strong, clear film that enhances floor appearance while standing up to heavy foot traffic.

It's a water based acrylic floor sealer for vinyl, timber and stone floors, made in Australia by Agar Cleaning Systems. Coverage runs 45 to 55 square metres per litre, so one 5Lt bottle lays roughly 225 to 275 square metres of thin, even coat. Application is undiluted, straight from the bottle, using a fringe mop or a bucket mop.

How 3D Gloss Enhances Shine and Floor Durability?

3D-Gloss dries to a colourless, tough modified acrylic film, metal cross-linked, with an outstanding gloss level and a very high degree of scratch repair when burnished. Floors reach peak gloss after only one or two buffs and keep their sparkle through the day, because the polymer resists abrasion instead of wearing away under traffic. High burnish response is what lets gas buffers and electric buffers both bring the shine up.

The fast cure rate is why supermarkets run it: the floor goes back into service quickly and the crew can burnish it under UHS machines. Slip resistance sits on the record too, tested under dry conditions to AS 4663-2013 at a mean dynamic coefficient of friction of 0.70 against a 0.40 minimum. The current Product Data Sheet and Safety Data Sheet are both on this page, so those numbers can go into the site file before the first coat goes down.

Key Features of 3D Gloss Floor Polish:

• Produces a crystal clear, high gloss finish.
• Designed for high traffic commercial environments.
• Non slip under normal, dry conditions.
• Compatible with gas and electric buffing machines.
• Supports long term shine through buffing and maintenance.
• Suitable for vinyl, sealed timber, and stone floors.

Suitable Floor Types:

• Vinyl and vinyl composite flooring.
• Sealed timber floors.
• Sealed stone surfaces.

Preparation:
1. Ensure the floor is clean and dry before application.
Strip old polish or wax and rinse the floor thoroughly.
2. Application:
Apply 3D-GLOSS using a clean mop or applicator.
Spread evenly in thin, uniform coats.
Allow each coat to dry completely before applying additional coats (approximately 20-30 minutes per coat).
Apply 2-3 coats for best results.
3.Buffing:
Once the final coat is dry, use a buffing machine (gas or electric) to enhance the gloss and durability.

Download PDS

Download SDS

Safety Information:
- Handling: Use in a well-ventilated area. Wear protective gloves and avoid contact with skin and eyes.
- Storage: Store in a cool, dry place away from direct sunlight. Keep the container tightly closed when not in use. Keep out of reach of children.
- First Aid: In case of contact with eyes, rinse immediately with plenty of water. If ingested, do not induce vomiting and seek medical advice immediately.

Environmental Impact:
- Proper Disposal: Dispose of contents and container in accordance with local regulations. Avoid releasing into the environment.
- Biodegradability: 3D-GLOSS is designed to be environmentally friendly, breaking down naturally to minimise its impact on the environment.