Whiteley Florogen Original 500ml Alcohol Based Surface and Air Deodoriser

Whiteley Florogen Original 500mL is a ready-to-use, alcohol-based air and surface deodoriser for removing unwanted odours and improving hygiene in the immediate area of use. The trigger bottle makes it easy to freshen the air or apply the product to suitable hard surfaces and concealed areas where odours tend to remain.

Florogen provides extremely long-lasting deodorisation and can remain effective for 24 hours or longer in some areas. It also kills 99.9% of bacteria and provides hospital strength odour control for commercial, healthcare, aged-care and residential environments.

Ready-to-Use Odour Control for Air and Hard Surfaces

Removes unwanted odours: Freshens enclosed areas and suitable hard surfaces after routine cleaning.

Long-lasting performance: Provides 24-hour deodorisation or longer in some areas.

Kills 99.9% of bacteria: Increases hygiene in the immediate area of use.

Hospital strength odour control: Suitable for demanding facilities where odours need stronger, longer-lasting control.

Ready-to-use bottle: Apply directly from the 500mL trigger bottle without dilution or decanting.

Where It Can Be Used

Use Florogen Original as an air or surface deodoriser in commercial, healthcare, aged-care and residential environments.

• Public, staff and residential washrooms
• Bathrooms and toilet areas
• Behind toilets for longer-lasting deodorisation
• Under sinks and washbasins
• Behind desks, cabinets and suitable furniture
• Inside waste bins after cleaning
• Hospital, healthcare and aged-care facility amenities
• Offices and other commercial facilities
• Household bathrooms and waste-bin areas
• Suitable hard surfaces requiring surface deodorisation

Important: Florogen is an air and surface deodoriser. It does not replace cleaning or an appropriate disinfectant where surface disinfection is required. Keep it away from ignition sources and use it with adequate ventilation.

Dilution: Use Florogen Original neat. Do not dilute.

1.Clean the area and remove the source of visible soil or waste.
2. For longer-lasting deodorisation, apply a small amount behind toilets, under sinks, behind desks or furniture, or inside waste bins after cleaning.
3. Florogen may also be used as a space deodoriser. Avoid direct inhalation of the atomised spray and use only with good ventilation.
4. Allow the treated area to remain ventilated after application.
5. Close the spray bottle and 5Lt container securely after use.

Surface check: Test a small hidden area before applying Florogen to painted, polished, coated or unfamiliar surfaces.

Important: Do not spray towards people or animals. Keep away from food, food-contact surfaces, flames, sparks, pilot lights and hot equipment.

Download PDS

Download SDS

Warning: Flammable liquid and vapour. Causes skin irritation and serious eye irritation.

Keep away from heat, sparks, open flames and hot surfaces. No smoking.
Use in a well-ventilated area and avoid breathing spray or mist.
Wear protective gloves and eye protection.
Keep the container tightly closed when not in use.
Take precautions against static discharge and use non-sparking tools when managing a spill.
Store below 30°C in a cool, dry and well-ventilated area away from direct sunlight.
Keep away from strong oxidising agents.

Eye contact: Remove contact lenses when easy to do and rinse continuously with running water for at least 15 minutes. Immediately contact the Poisons Information Centre on 13 11 26 or a doctor.

Skin contact: Remove contaminated clothing and wash the skin with plenty of soap and water. Seek medical advice if irritation continues. Wash clothing before reuse.

Inhalation: Move the person to fresh air. Apply artificial respiration if the person is not breathing and obtain medical assistance.

If swallowed: Do not induce vomiting. Contact the Poisons Information Centre on 13 11 26 or a doctor.

Fire: Use dry chemical, carbon dioxide, alcohol-stable foam, fine water spray or fog. Burning may produce carbon monoxide and carbon dioxide.

Spills: Remove ignition sources, ventilate the area and wear protective equipment. Contain larger spills with sand, vermiculite or another inert non-combustible absorbent. Use non-sparking tools, collect the waste for disposal and prevent bulk product from entering waterways.

Environmental and disposal information: Dispose of unused product according to local requirements. Empty containers may be rinsed and recycled where accepted.

Transport classification: Not classified as Dangerous Goods under the Australian Dangerous Goods Code.