Roller Brush for Dyson V8 (SV10) Cordless Vacuum Cleaners

Replacement Brush Roller For Dyson V8 SV10 

Direct Drive Agitator Bar | Replaces Part 967485-01

Is your Dyson V8 leaving pet hair and debris behind on your carpets? The brush roller inside the Direct Drive cleaner head rotates at incredibly high speeds to agitate carpet fibres and lift embedded dirt. Over time, the stiff bristles become flattened, worn down, or snapped. When this happens, the vacuum loses its ability to flick debris into the suction path, drastically reducing its cleaning efficiency.

This Premium Compatible Brush Roller is engineered specifically for the Dyson V8 SV10 Direct Drive Cleaner Head. By installing a fresh agitator bar, you instantly restore the deep-cleaning capability of your vacuum, reducing the number of passes required to clean a room and putting less strain on the digital motor.

Compatibility Guide For Dyson V8 Vacuums

Please check the silver sticker on the underside of your vacuum's battery to find your "SV" model number. This replacement brush is exclusively designed for the following model:

Supported V8 Models

1. Dyson V8 SV10 (Fitted with the Direct Drive Cleaner Head)

Important Exclusions

(Note: Dyson manufactured two distinctly different versions of the V8 vacuum. This roller is NOT compatible with the newer Dyson V8 SV25 platform, nor is it compatible with the V8 "Fluffy" Soft Roller head. The drive shafts on these models are completely different shapes. You must confirm your machine says "SV10" before purchasing).

Kit Contents

1. 1 x Replacement Direct Drive Brush Roller (Replaces Dyson Part 967485-01)

Why Choose This Replacement Brush Roller?

• Restores Deep Cleaning: Stiff, brand-new bristles effectively separate carpet fibres to lift deeply embedded dust, sand, and pet hair that a worn brush leaves behind.
• Maintains Airflow: A correctly fitted, high-quality roller ensures smooth rotation within the cleaner head housing, preventing blockages and maintaining optimal suction.
• Cost-Effective Repair: Replaces the internal agitator bar without forcing you to buy an entirely new, expensive Direct Drive floor head assembly.
• Protects Your Motor: A worn or jammed brush forces the vacuum motor to work harder, draining the battery faster. A fresh, smooth-spinning roller restores efficiency.

How to Install the Replacement Dyson Roller

• Turn off the vacuum cleaner and disconnect the cleaner head from the wand.
• Turn the Direct Drive cleaner head upside down to access the base.
• Use a coin (like a 20-cent piece) or a flathead screwdriver to turn and unlock the end cap on the side of the cleaner head.
• Remove the end cap and carefully slide the old, worn brush roller out of the housing.
• Slide the new replacement roller into the housing, ensuring the drive shaft lines up correctly.
• Reattach the end cap and turn it with your coin to lock it securely in position.
• Reconnect the head to your vacuum and run a short test to confirm smooth rotation.

Frequently Asked Questions

• Q. Why has my Direct Drive head stopped spinning entirely?
• A. If the head has completely stopped spinning, a worn brush roller might be jammed with tightly wound hair, or the internal motor inside the floor head may have failed. If cleaning the brush doesn't fix it, replacing the roller is the next diagnostic step.
• Q. Will this fit my Dyson V7?
• A. No. While the V7 and V8 look similar, the internal drive shaft connections inside the floor heads are different sizes. This part number (967485-01) is strictly for the V8 SV10.
• Q. Do I need special tools to install this?
• A. No special tools are required. The locking cap on the side of the Dyson cleaner head is specifically designed to be opened with a standard household coin.

Technical Specifications

• Product Type: Motorised Cleaner Head Brush Roller / Agitator Bar
• Compatibility: Dyson V8 SV10 Direct Drive Head Only
• Replaces OEM Part: 967485-01
• Function: Carpet agitation and hard floor sweeping

- Perfect Fit:
Compatible with Dyson V8 SV10 cordless vacuums.
- Alternative to Dyson Part 967485-01:
Reliable non-genuine replacement.
- Improves Cleaning Performance:
Agitates and lifts dirt, ensuring effective pickup.
- Easy Installation:
Simple to replace for hassle-free vacuum maintenance.
- Not Suitable for SV25 Models – Check your vacuum’s pre-filter design before purchase.

'- Dyson V8 SV10 cordless vacuums
- SV10 models with a Direct Drive Cleaner Head
- Not Suitable for SV25 Models Dyson V8 with Star pre-filter