Service Kit For Roborock S8 MaxV Ultra & S8 Max Ultra Robot Vacuum Cleaners

Why This Roborock S8 MaxV Ultra and S8 Max Ultra Replacement Kit Restores Full Cleaning Performance

This complete replacement parts kit for Roborock S8 MaxV Ultra and Roborock S8 Max Ultra robot vacuums is designed to restore suction power, brushing efficiency, and mopping effectiveness by replacing all key consumable components in one service cycle. The kit includes replacement brushes, filters, mop pads, and dust bags required to maintain efficient vacuuming, edge cleaning, and floor scrubbing across hard floors and carpets. It provides a practical maintenance solution for keeping robotic cleaning performance consistent over time.

How Replacing Brushes, Filters, and Mop Pads Improves Roborock Cleaning Results

As robotic vacuums operate, brushes gradually wear, filters become restricted with fine dust, and mop pads lose absorbency, reducing overall cleaning efficiency. Replacing DuoRoller brushes restores proper agitation and debris pickup, while fresh HEPA filtration supports strong airflow and fine particle capture. New Vibrarise and Edgewise mop pads help maintain effective stain removal and edge cleaning, ensuring floors are cleaned evenly from centre to perimeter during every cycle.

Which Robots Fit This Service Kit?

• Roborock S8 MaxV Ultra
• Roborock S8 Max Ultra

Note: This kit includes the specific "Edgewise" mop cloths designed for the MaxV Ultra and Max Ultra models. It may not suit standard S8 or S8 Pro Ultra models due to differences in mopping configurations.

How to Install Your Roborock Replacement Parts

1. DuoRoller Brushes: Turn the robot over and unclip the main brush cover. Remove the old red and black rollers. Insert the new Front and Rear brushes, ensuring they match the colour-coded diagrams on the housing, then lock the cover back in place.
2. Side Brushes: Use a small screwdriver to loosen the screw holding the old side brush (if screwed) or snap it off (if clipped). Attach the new side brush and secure it.
3. HEPA Filters: Remove the dust bin from the robot, open the filter flap, and slide out the old filter. Insert the new HEPA filter and ensure it seals tight.
4. Mop Pads: Slide the old Vibrarise cloth off the vibrating plate and attach the new one using the velcro backing. Pull the small Edgewise mop cloth off the rotating side mount and press the new one in place.
5. Vacuum Bags: Open the lid of the docking station. Pull the plastic tab on the old bag to seal and remove it. Slide the new bag into the guide rail until it clicks.

When to Replace Service Parts

To keep your robot running at peak efficiency, we recommend replacing the side brushes and filters every 3 to 6 months. The main DuoRoller brushes should be replaced every 6 to 12 months or when the rubber treads appear worn. Mop pads should be washed regularly and replaced when the fibres become flattened or permanently stained. Vacuum bags should be replaced as soon as the dock indicates they are full.

Frequently Asked Questions About This Service Kit

• Q. Will this fit the Roborock S8 Pro Ultra?
• A. This kit is specifically designed for the S8 MaxV Ultra and S8 Max Ultra. While some parts like bags might share compatibility, the mopping components (specifically the Edgewise cloth) are unique to the Max series.
• Q. Are the filters washable?
• A. Yes, the HEPA filters are washable. Rinse them with water only and ensure they are completely dry (for at least 24 hours) before reinstalling them to prevent mould or motor damage.
• Q. What is the difference between the two mop types included?
• A. The Vibrarise Mop Pads are the large flat cloths for the main mopping zone, while the Edgewise Mop Cloths are the smaller circular pads that clean along skirting boards and corners.
• Q. How often should I change the dust bag?
• A. This depends on usage, but typically a bag lasts 6–8 weeks. Replace it immediately when full to prevent dust from clogging the dock's suction motor.

- Restores suction strength and cleaning consistency.
- Improves carpet agitation and fine dust pickup.
- Maintains mopping efficiency for dried marks and daily grime.
- Reduces missed debris caused by worn brushes or blocked filters.
- Saves time by replacing all consumables at once.

Roborock S8 MaxV Ultra
Roborock S8 Max Ultra

Note: This kit includes the specific "Edgewise" mop cloths designed for the MaxV Ultra and Max Ultra models. It may not suit standard S8 or S8 Pro Ultra models due to differences in mopping configurations.