3-Stage Replacement Filter for Philips 3000i Series Air Purifiers, Replaces FY3430/30

This MyVac 3-stage filter replaces the NanoProtect filter Series 3 (FY3430/30) in Philips 3000i Series air purifiers AC3033, AC3036, AC3039, AC3055, AC3058 and AC3059. Fit it when your purifier says the filter is due, and it goes back to cleaning the air in your room.

Not suitable for the Philips AC2936, which takes a different Philips filter (FY2180).

How the 3 stages work

• Pre-filter: the outer layer that catches larger dust, lint and hair
• Pleated particle filter: traps finer dust as air passes through
• Activated carbon layer: takes on everyday household odours

All three stages are built into one unit and are replaced together. The pack contains 1 filter.

When to replace it and how to fit it

On the AC3033, AC3036 and AC3039, the filter status light moves from blue-purple to red as the filter wears. At red, the purifier locks and stops running until a new filter is fitted and the filter counter is reset.

• Unplug the purifier.
• Pull off the back cover and take out the old filter.
• Remove all packaging from the new filter, slide it in and refit the cover.
• Plug in and switch on. Within 15 seconds, hold the filter reset button for 3 seconds.

Between changes, the purifier may show a filter cleaning alert. Clean the outer surface of the filter, then hold the reset button for 3 seconds.

Philips part it replaces

Replaces Philips part number FY3430/30 (NanoProtect filter Series 3). The Philips number is shown only to help you match the part.

Compatible replacement part, not made by the original manufacturer. Brand and model names are shown only to identify fit and do not suggest any affiliation or endorsement.

Pre-filter, particle filter and activated carbon in one cartridge
Outer pre-filter catches larger dust before the inner layers
Pleated particle filter traps fine household dust
Activated carbon layer for everyday household odours