iRobot Roomba 800 & 900 Series Compatible Replacement Brush Filter Kit with Debris Extractors (Replaces 4415866)

Replacement brush extractor filter and side brush maintenance kit for iRobot Roomba 800 and 900 series robot vacuum cleaners

This compatible replacement accessories kit for iRobot Roomba 800 and 900 series robot vacuum cleaners restores cleaning efficiency by replacing key maintenance components including the dual AeroForce compatible debris extractors, high efficiency filters and edge sweeping side brushes. Over time these components collect dust hair and debris which can reduce suction airflow and cleaning performance. Installing fresh replacement parts helps maintain strong airflow, reliable debris pickup and effective edge cleaning across carpets and hard floors.

How replacing Roomba debris extractors filters and side brushes improves cleaning performance

Robot vacuum components gradually wear during normal cleaning cycles. Rubber debris extractors lose their ability to agitate carpet fibres, side brushes become bent or worn which reduces corner cleaning performance, and filters restrict airflow as they fill with dust. Replacing these components restores proper airflow through the vacuum system and helps maintain consistent suction performance and debris collection.

Roomba 800 and 900 series replacement kit contents

• Dual tangle free debris extractor rollers designed to lift hair dust and debris from carpets and hard floors without tangling.
• Two AeroForce compatible high efficiency filters designed to capture fine dust particles and allergens while maintaining airflow.
• Two side brushes designed to sweep debris from corners edges and along skirting boards toward the suction inlet.

Compatible iRobot Roomba robot vacuum models

This replacement accessories kit is suitable for the following robot vacuum cleaners.

• Roomba 800
• Roomba 805
• Roomba 860
• Roomba 861
• Roomba 864
• Roomba 866
• Roomba 870
• Roomba 880
• Roomba 890
• Roomba 891
• Roomba 894
• Roomba 900
• Roomba 960
• Roomba 961
• Roomba 964
• Roomba 966
• Roomba 980

These components are designed as compatible replacements for original iRobot part number 4415866.

How to install Roomba 800 and 900 series replacement parts

1. Turn off the robot vacuum and remove it from the charging dock.
2. Turn the robot upside down and remove the brush guard cover.
3. Remove the worn debris extractor rollers and insert the new extractors into the brush housing.
4. Pull off the worn side brush and attach the new side brush to the mounting point.
5. Remove the dust bin and open the filter compartment.
6. Remove the used filter and install the replacement AeroForce filter.
7. Close the dust bin and reinstall it into the robot vacuum.
8. Restart the robot and run a short cleaning cycle to confirm correct operation.

Recommended replacement intervals

• Side brushes should typically be replaced every three to six months depending on cleaning frequency.
• Filters should be replaced every three to six months to maintain airflow performance.
• Debris extractor rollers should generally be replaced every six to twelve months depending on wear and hair buildup.

Regular replacement helps maintain strong suction performance and reliable floor cleaning results.

Frequently asked questions

• Q. How often should Roomba filters be replaced
  A. Filters are generally replaced every three to six months depending on cleaning frequency and dust levels.
• Q. What are compatible AeroForce debris extractors
  A. AeroForce extractors are rubber rollers designed to lift debris from carpets and hard floors while reducing hair tangling.
• Q. Can worn debris extractors reduce cleaning performance
  A. Yes worn extractors reduce the robot vacuum’s ability to agitate carpet fibres which lowers debris pickup.
• Q. Are Roomba 800 and 900 series side brushes interchangeable
  A. Yes the side brushes included in this kit are designed to fit both the 800 and 900 series models.
• Q. Can clogged filters affect suction
  A. Yes clogged filters restrict airflow which can reduce suction and dust collection performance.

Technical specifications

Set Includes:

1 X Tangle-free debris extractor set for iRobot Roomba 800/900 series
2 X AeroForce high-efficiency filters for iRobot Roomba 800/900 series
2 X Side brushes for iRobot Roomba 800/900 series

All iRobot Roomba 800 and 900 series models, including: 800, 805, 860, 861, 864, 866, 870, 880, 890, 891, 894, 900, 960, 961, 964, 966, 980