Agar Ultrastrip Water Based Polish Remover 5L

Agar Ultrastrip Water Based Floor Polish Remover 5L – Strips Away Tough Polish Build Up

Agar Ultrastrip is a low odour water based stripper designed to remove polish coatings from sealed hard floors including vinyl terrazzo marble and concrete. It cuts through tough layers of floor sealer without ammonia fumes and rinses clean without leaving a residue

Key Benefits of Ultrastrip Polish Remover:

• Quickly strips away polish films and coatings from hard floors
• Safe for use on vinyl tiles concrete marble and terrazzo
• Non flammable low odour and free from harsh ammonia
• Rinses easily without leaving sticky or cloudy residue
• Suitable for both machine scrubbing and manual stripping

Where to Use Ultrastrip:

Ultrastrip is ideal for commercial floor maintenance and deep cleaning in schools shopping centres offices aged care facilities and healthcare environments

Recommended Applications

• Stripping polish from vinyl composite tiles and sealed concrete
• Removing worn coatings from terrazzo and marble
• Preparing floors for recoating with new polish or sealer
• Use with autoscrubbers mops or rotary scrubbers

Safety Information:

• Avoid skin and eye contact. Wear chemical resistant gloves and safety goggles
• Eye Contact: Rinse cautiously with water for several minutes
• Skin Contact: Wash thoroughly with soap and water
• Ingestion: Rinse mouth and seek medical advice
• Keep away from children. Store in a cool dry area
• Use in ventilated spaces to reduce vapour build up

Environmental Care

• Ultrastrip is water based and ammonia free
• Contains biodegradable surfactants
• Free from flammable solvents

Download PDS/SDS

https://agar.com.au/product/ultrastrip/?attachment_id=21578&download_file=l1ocx8jco5snk

https://agar.com.au/product/ultrastrip/?attachment_id=15216&download_file=tty3719uv3d7p

Dilution Rates and Application Quantities:
Light Polish Film: Dilute at 1:10 (1 part Ultrastrip to 10 parts water). Quantity required: 0.56 L per 100 sq metres.
Medium Polish Film: Dilute at 1:7 (1 part Ultrastrip to 7 parts water). Quantity required: 0.80 L per 100 sq metres.
Heavy Polish Film: Dilute at 1:5 (1 part Ultrastrip to 5 parts water). Quantity required: 1.2 L per 100 sq metres.
Very Heavy Polish Film: Dilute at 1:3 (1 part Ultrastrip to 3 parts water). Quantity required: 2.0 L per 100 sq metres.
Application Method: Apply the diluted solution evenly to the floor using a mop or applicator. Ensure complete coverage of the area to be stripped.
Contact Time: Allow the solution to sit for approximately 10-15 minutes to break down the polish effectively. For thicker layers, a longer contact time may be necessary.
Scrubbing: Use a rotary scrubber or floor machine with a stripping pad to agitate the solution and remove the old polish.
Rinsing: Thoroughly rinse the floor with clean water to remove any residual polish remover. Ensure all residues are removed before applying new polish or finishes.

Download PDS

Download SDS

Safety Information:
- Avoid skin and eye contact. Wear chemical resistant gloves and safety goggles
- Eye Contact: Rinse cautiously with water for several minutes
- Skin Contact: Wash thoroughly with soap and water
- Ingestion: Rinse mouth and seek medical advice
- Keep away from children. Store in a cool dry area
- Use in ventilated spaces to reduce vapour build up

Environmental Care:
- Ultrastrip is water based and ammonia free
- Contains biodegradable surfactants
- Free from flammable solvents