Agar Truck Wash Premium Car & Truck Shampoo Detergent 5Lt

Agar Truckwash is a powerful heavy-duty detergent designed specifically for cleaning trucks, trailers, buses, and commercial vehicles. Its tough, concentrated formula effectively cuts through road grime, grease, oil, and exhaust soot, restoring the appearance of your fleet without damaging paintwork or delicate finishes. Suitable for use with high-pressure washers, foam sprayers, or manual washing, Truckwash provides a versatile and economical solution for transport cleaning.

Cut Through Tough Road Grime and Grease

Commercial vehicles accumulate heavy layers of dirt, oil, and traffic film that standard car washes struggle to remove. Agar Truckwash is formulated to dissolve these stubborn contaminants quickly. The rapid-action surfactants lift dirt from the surface, allowing it to be rinsed away easily. Despite its industrial strength, the formula is chemically balanced to be safe on vehicle surfaces, ensuring that chrome, paint, and graphic wraps remain intact and vibrant after cleaning.

Versatile Application Methods

Whether you are cleaning a single van manually or washing a fleet of prime movers with industrial equipment, Agar Truckwash is adaptable to your setup.

• High-Pressure Washers: Ideal for rapid cleaning of large surface areas.
• Foam Guns: Creates a thick foam that clings to vertical surfaces, increasing dwell time for better breakdown of soil.
• Manual Washing: Suitable for detailed bucket-and-sponge cleaning on smaller vehicles or specific areas.

Dilution Rates and Usage Instructions

Agar Truckwash is a highly concentrated product that must be diluted with water before use.

• Heavy-Duty Cleaning (1:50): Mix 1 part Truckwash with 50 parts water. Use this ratio for vehicles with heavy grease, oil build-up, or thick mud.
• General Cleaning (1:100): Mix 1 part Truckwash with 100 parts water. Use this ratio for regular maintenance washing and lighter road soil.

Application Steps:

• Pressure Washer: Apply the diluted solution evenly over the vehicle surface using a high-pressure washer. Allow it to dwell for a few minutes to break down the grime, then rinse thoroughly.
• Foamer: Dilute according to your foam lance manufacturer's instructions. Apply foam generously, allow to dwell, and rinse off.
• Manual: Apply with a sponge or soft truck brush, scrubbing lightly to loosen contaminants. Rinse thoroughly with clean water.

Important Note: Do not apply to hot surfaces (e.g., engines or metal in direct sun) and do not allow the product to dry on the vehicle before rinsing, as this may leave residue.

Download PDS/SDS

https://agar.com.au/product/truckwash/?attachment_id=18701&download_file=9cbdrgxp7k13f

https://agar.com.au/product/truckwash/?attachment_id=16664&download_file=ad0fg0vx11alt

Frequently Asked Questions About Agar Truckwash

• Q. Is this safe for my vehicle's paintwork?
• A. Yes, Agar Truckwash is formulated to be gentle on vehicle surfaces while providing heavy-duty cleaning. It preserves the integrity of paintwork and finishes when used as directed.
• Q. Can I use this in a foam gun?
• A. Absolutely. It is suitable for foamers; simply dilute it according to the foamer manufacturer’s recommendations to create a rich lather that lifts dirt.
• Q. Is this product biodegradable?
• A. Yes, it is formulated with biodegradable components to minimise environmental impact, supporting sustainable cleaning practices.
• Q. What should I do if the product gets in my eyes?
• A. Rinse immediately with plenty of water for at least 15 minutes and seek medical attention if irritation persists. Always wear protective eyewear when handling concentrates.

Safety and Environmental Information

Precautions

• Personal Protection: Wear gloves and protective eyewear to avoid skin and eye contact. Use in well-ventilated areas to minimise inhalation of fumes.
• Storage: Store in a cool, dry place away from direct sunlight and incompatible substances. Keep out of reach of children and pets.
• Environmental: The concentrated 5L container reduces packaging waste compared to smaller, pre-mixed bottles.

- Heavy-Duty Cleaning: Effectively removes tough road grime, grease, oil, and dirt from trucks, trailers, and commercial vehicles, restoring their appearance and cleanliness.

- Versatile Application: Suitable for use with high-pressure washers, foamers, and manual washing methods, making it adaptable to various cleaning setups.

- Concentrated Formula: The 5L concentrate offers an economical solution with long-lasting supply, allowing for multiple uses and reducing the frequency of repurchase.

- Rapid Action: Quickly dissolves and lifts contaminants, reducing the time and effort required for cleaning.

- Safe for Vehicle Surfaces: Formulated to be gentle on vehicle surfaces while providing powerful cleaning action, preserving the integrity of paintwork and finishes.

For heavy-duty cleaning, dilute Agar Truckwash at a ratio of 1:50 (1 part Truckwash to 50 parts water).

For general cleaning or lighter soil, dilute at a ratio of 1:100 (1 part Truckwash to 100 parts water).

Download PDS

Download SDS

Personal Protection: Wear gloves and protective eyewear to avoid skin and eye contact. Use in well-ventilated areas to minimize inhalation of fumes.

Eye Contact: In case of eye contact, rinse immediately with plenty of water for at least 15 minutes and seek medical attention if irritation persists.

Skin Contact: If the solution contacts skin, wash thoroughly with soap and water. Seek medical advice if irritation develops.

Storage: Store in a cool, dry place away from direct sunlight and incompatible substances. Keep out of reach of children and pets.

Ingestion: Do not ingest. If swallowed, seek medical attention immediately.

Environmental Impact:

Biodegradable Ingredients: Formulated with biodegradable components to minimize environmental impact, supporting sustainable cleaning practices.

Efficient Packaging: The 5L container helps reduce packaging waste and transportation costs compared to smaller sizes, contributing to a lower overall ecological footprint.