Price-Beat Guarantee. Get Your Quote. Call us +61 3 5995 8444

Need a Bulk Quote or Repair? Call us +61 3 5995 8444

Free* Victoria Delivery Over $150 🚚

Agar Cleaning Systems  |  Barcode: 9326737005011

Agar AS-60 Alcohol Surface Sanitiser 5Lt

For sanitising already cleaned hard surfaces and food contact areas in commercial kitchens, food prep areas, healthcare and laboratory settings.
Agar AS-60 is a 5Lt ready to use alcohol based surface sanitiser for benches, equipment and high touch points.
Ready to use with no dilution; it air dries quickly and leaves no rinse step and no sticky residue.
Use only as directed; clean the surface first, keep away from heat and flame, and check surface suitability before use.
Please Note: That product CAN'T be shipped outside of Victoria.

Regular price $53.95 AUD
Tax included Shipping calculated at checkout.

Pickup available at Janitorial Depot

Usually ready in 2 hours

Pickup Times: Monday to Friday 9am – 5pm (Excluding public holidays)

Description

In a gym, an office or a busy reception, the same handles, benches and touch points get used by one person after another all day. Between users there is rarely time to clean, rinse and wait, so the sanitising step has to be quick and it has to leave the surface ready to use straight away.

Agar AS-60 is a ready to use, alcohol based surface sanitiser made for that kind of turnaround. It comes in a 5Lt bottle, and you either spray it straight onto the surface or wipe it on with a cloth. Once it is on, it dries by itself, so there is nothing to rinse off and nothing to wipe away before the next person.

Built for high-touch surfaces that need to be back in use in seconds

The alcohol carrier flashes off fast and leaves no film, smear or sticky residue, which is what makes it practical on equipment grips, benches, rails and door furniture that someone will take hold of again a minute later. Clean the surface first to lift sweat, dust and soil, then finish with AS-60 as the sanitising step.

The same alcohol base dissolves certain resins, inks, cosmetics, fats and oils, and lifts sticky tape residue, fingerprints and smears from hard surfaces, so glass, mirrors and stainless steel come up clear without streaking. Current SDS and PDS are available for staff, workplace records and site cleaning procedures.

For a cleaning team covering high-traffic sites, the value comes down to a few practical things.

Ready to use with no mixing: AS-60 arrives at working strength in a 5Lt bottle, so staff apply it straight from the container and there is no dilution to get wrong before a shift.

Made for high human contact points: it suits the handles, grips, rails, taps and touch plates that get used all day, sanitising them without a rinse so the next person can use the surface straight away.

Dries in seconds without residue: it leaves no streak, smear or sticky film, so equipment, glass and bench tops look clean and are ready for the next person or the next tray.

Suited to food contact surfaces: AS-60 is made for benches, boards and utensils once they are cleaned, so a kitchen or cafe can sanitise food areas without adding a rinse step.

SDS and PDS on hand: both documents are available, which covers the workplace records that gyms, clinics and commercial kitchens need before a chemical goes into daily use.

Where AS-60 can be used:

  • High human contact points such as door handles, taps, touch plates, handrails and shared equipment grips.
  • Benches, counters, tables and reception surfaces.
  • Food contact surfaces such as benchtops, cutting boards, utensils, cutlery and range hoods, once cleaned.
  • Hotplates when cold, not when hot.
  • Healthcare equipment, trolleys, bed rails and clinical touchpoints.
  • Phones, computer keyboards, glass, mirrors, stainless steel and hard plastics.
  • Mattresses and carpets.

Use with care on: hot surfaces and electronics. Let hotplates cool before you sanitise them, and never spray AS-60 straight onto screens or live electrical parts. Put it on a cloth and wipe those down instead.

Specifications

  • Manufacturer's data
    Product Type: Surface Sanitiser
    Brand: Agar
    Product Name: AS-60 Alcohol Surface Sanitiser
    Chemical Type: Alcohol based sanitiser
    Pack Size: 5Lt
    Colour: Colourless
    Dilution: Ready to use
    Rinse Requirement: No rinse required
    Suitable Surfaces: High human contact points, pre-cleaned hard surfaces, food contact surfaces, glass, mirrors, stainless steel, hard plastics, mattresses, carpets
    Not Suitable For: Hot surfaces; direct spraying onto electronics or live electrical parts
    Food Area Suitability: Yes, as a final sanitiser after cleaning
    SDS Available: Yes
    PDS Available: Yes
    GTIN or Barcode: 9326737005011
    Condition: New

Usage Guidelines

AS-60 is ready to use, so there is no dilution. Clean the surface first, then use AS-60 as the final sanitising step.

On general hard surfaces:

1. Clean the surface and remove any visible soil.
2. Apply AS-60 directly to the surface, or wipe it on with a clean cloth soaked in the product.
3. Spread it evenly so the whole surface is covered.
4. Let the surface air dry. Do not wipe or rinse it off.

On food contact surfaces: clean the bench, board or utensil first, apply AS-60 as the final sanitiser, and let it dry fully before the surface is used for food again.

On healthcare equipment: wipe the item down with a cloth soaked in AS-60 and let it air dry.

Around electronics: do not spray AS-60 straight onto screens or live electrical parts. Spray a little onto a cloth and wipe the device instead.

Because AS-60 is alcohol based and flammable, keep it and the freshly treated surface away from heat, sparks and open flames while it dries.

FAQ

Q. What is Agar AS-60 used for?

A. It sanitises high human contact points and hard surfaces that have already been cleaned, such as equipment grips, handles, rails, benches, food prep areas and healthcare equipment. Clean the surface first, then apply AS-60 as the final step.

Q. Do I need to dilute it?

A. No. AS-60 is ready to use at working strength, so apply it straight from the bottle. Diluting it weakens the alcohol and the sanitising step.

Q. Can I use it on food contact surfaces?

A. Yes. Use it as the final sanitiser after cleaning benches, boards or utensils, and let it dry completely before the surface is used for food again. No rinse is needed.

Q. Does it need rinsing or wiping off?

A. No. AS-60 air dries on the surface and leaves no residue, so leave it to dry rather than wiping or rinsing it away.

Q. Can I use it on screens and electronics?

A. Spray it onto a clean cloth first, then wipe the device. Do not spray AS-60 directly onto screens or live electrical parts.

Q. Is an SDS available?

A. Yes. Both the SDS and PDS are available for AS-60 for your workplace records and site cleaning procedures.

Safety Information & Environmental Impact

Download PDS

Download SDS

Safety Information:
- Classified as flammable. Keep away from heat sparks open flames and hot surfaces
- Store in a well ventilated area. Keep container tightly closed.
- Avoid inhalation of vapour. Use only outdoors or in well ventilated spaces
- Use gloves for prolonged use or sensitive skin
- Eye Contact: Flush with water for 15 minutes. Seek medical advice if irritation persists
- Ingestion: Do not induce vomiting. Seek immediate medical attention
- Keep out of reach of children

Environmental Care:
- Contains biodegradable alcohol compounds
- Avoid release into waterways or soil
- Empty containers can be recycled or disposed of according to local waste regulations

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.