Micro / Mini Vacuum Cleaner Accessory Tool Kit for 32mm & 35mm Vacuum Cleaners
Regular price $19.95 AUDUnit price-
Long Flexible Crevice Tool with Radiator Brush – Reach Deep Into Tight Spaces Fits 32 & 35 mm
Regular price $9.95 AUDUnit price-
Tool Floor Combination Extra Wide Carpet/Hard Floor 32mm
Regular price $19.95 AUDUnit price-
Vacuum Floor Brush for Timber & Laminate Flooring Synthetic Bristles 32mm Diameter 300mm wide
Regular price $14.38 AUDUnit price-
Numatic Vacuum Spare Parts Model Matrix
Start with the full model number, then confirm the bag code, filter size and tool connection.
| Numatic Model or Part Type | Common Replacement Parts | Critical Compatibility Check |
|---|---|---|
| Henry HVR200, Hetty HET200 and James JVP180 |
NVM-1CH style dust bags,
12-inch TriTex filter,
32 mm rods, floor tools and small attachments
180 and 200 dry models |
Confirm the full model and the bag system. Commercial 180 and 200 models commonly use the larger 12-inch filter, while some Home 160 and 170 models use an 11-inch filter. |
| PSP180, PRP180, NVH180, ERP180 and NBV190 |
NVM-1CH bags, 12-inch filters, 32 mm tool kits, rods and floor tools
Commercial compact models |
Use the full model suffix where shown, especially for battery, HEPA or specialist versions. The model family alone may not confirm the electrical or filtration component. |
| Charles CVC370 and George GVE370 |
NVM-2BH dry-use bags, 12-inch TriTex filters, 32 mm tools and wet or extraction accessories
Wet, dry and extraction models |
These 370 machines use a different bag family from many 180 and 200 models. Confirm NVM-2BH rather than assuming an NVM-1CH bag fits. Dust bags are for dry pickup only. |
| PPR370, PSP370, WV370, WV470 and NVQ370 |
NVM-2BH bags, 12-inch filters, 32 mm rods, floor tools and selected wet-and-dry components
Larger commercial models |
Match the complete 370 or 470 model and confirm whether the part is for dry, wet or specialist filtration use. Drum size alone does not identify the correct motor, float, filter or bag. |
| Henry and Hetty 160 or 170 Home Models |
11-inch filter systems, model-specific bags and selected 32 mm attachments
Smaller filter size |
Do not use a 12-inch filter solely because the machine is called Henry or Hetty. Check the number on the model label. Numatic identifies 160 and 170 machines separately from 180, 200, 240 and 370 machines. |
| TriTex Filters |
TriTex 604165-style filter
Filter sizing |
Check 11-inch versus 12-inch size, machine diameter and any HEPA or allergy-specific version. A filter may look similar but prevent the lid from seating correctly if the size is wrong. |
| Dust Bags |
NVM-1CH compatible bag pack
Bag code first |
Match the bag code and complete model. NVM-1CH and NVM-2BH are different systems. Do not rely only on the Henry, George or Numatic name printed in a broad compatibility list. |
| 32 mm Floor Tools |
Low-profile gulper head,
combination floor head and
dusting brush
Non-powered tools |
Confirm a 32 mm connection and choose the tool for carpet, hard floor or detail cleaning. Universal non-powered tools are not the same as original Numatic powered or extraction attachments. |
| Rods and Extension Wands |
32 mm telescopic wand and
two-piece chrome rod set
Connection check |
Check the handle end, floor-tool end, tube diameter and whether the existing hose uses a separate metal bend. Diameter alone does not confirm every hose-and-wand combination. |
| Small Attachments and Tool Kits |
Mini accessory kit, crevice tools, upholstery tools and brushes
Detail cleaning |
Check whether the kit connects directly to 32 mm equipment or requires an adaptor. Confirm every included component rather than assuming all tools shown in images are supplied. |
| George Extraction Parts |
Extraction hose, solution line, hand tool and carpet extraction components
GVE370 specific |
An extraction hose includes water-delivery components and is not interchangeable with a standard dry suction hose. Match George GVE370 and the original part number before ordering. |
| Wet-and-Dry Parts |
Float assemblies, wet filters, squeegee tools, hoses, seals and dry-mode filter components
Operating mode specific |
Change the machine setup as directed when moving between wet and dry pickup. Do not use a dry paper bag during liquid pickup and do not assume a dry floor tool is suitable for water collection. |
| Hazardous Dust and HEPA Models |
Model-specific H-Class or HEPA filters, bags, seals and certified components
Specialist filtration |
Do not substitute a general TriTex filter or ordinary bag in an H-Class, hazardous-dust or specialist HEPA machine. Use the exact approved component and follow applicable safety requirements. |
| Motors, Switches and Electrical Parts |
Motors, switches, leads, cable assemblies and internal electrical components
Technical repair |
Match the full model, production version, voltage, wattage, terminals, dimensions and original part number. Electrical repairs should be completed by a suitably qualified repairer. |
Need help matching a Numatic part? Contact Janitorial Depot with the complete model number, bag or part code, filter diameter and clear photos of the rating label, old part and connection points. For internal faults, review the vacuum service and repair information before purchasing a motor or electrical component.
Numatic Vacuum Cleaner Spare Parts FAQs
Model identification, bag codes, filter sizes, 32 mm tools, wet pickup and repairs.
Q. How do I identify the correct Numatic spare part?
Locate the machine rating label and record the complete model number, including letters and suffixes. Then match the bag or part code, filter diameter, fitting size and wet or dry application shown on the product page.
Q. Where is the model number on a Henry, Hetty or Numatic vacuum?
The model label is commonly located under the carry handle, underneath the motor head or on the machine body. Record the complete reference, such as HVR200, HET200, JVP180, CVC370, GVE370 or PSP180.
Q. What is the difference between NVM-1CH and NVM-2BH bags?
They are different Numatic HepaFlo bag systems for different machine families. NVM-1CH is commonly associated with compact 180 and 200 models, while NVM-2BH is used by selected larger 370 and 470 models, including Charles, George and various commercial machines. Match the exact model and bag code.
Q. Do all Henry and Hetty vacuums use the same filter?
No. Numatic separates 11-inch and 12-inch filter systems. The 11-inch filter is associated with selected 160 and 170 models, while the 12-inch filter is used by many 180, 200, 240 and 370 machines. Allergy, HEPA and specialist variants may require a different filter.
Q. Does the TriTex 604165-style filter fit every Numatic vacuum?
No. It is a 12-inch style filter for specified compatible machines. Check the model number, filter diameter and lid seating. It should not be assumed to fit smaller 160 or 170 machines or specialist HEPA and hazardous-dust models.
Q. Are Numatic floor tools and rods usually 32 mm?
Many Henry, Hetty, James, Charles, George and commercial Numatic tools use 32 mm connections, but the complete hose, handle and machine setup must still be checked. Powered, extraction and specialist tools may use additional connections.
Q. Can I use a universal 32 mm floor head on a Numatic vacuum?
A universal non-powered 32 mm floor head may fit selected Numatic rods or handles when the connection matches. It is not equivalent to an original powered, wet-pickup or extraction tool. Choose the head for the intended floor surface and application.
Q. Can the same hose be used for Henry, Charles and George?
Selected dry suction hoses may support several Numatic models, but the handle, cuff and machine-end connection must be checked. George extraction work requires a dedicated hose with a water-delivery line, which is not the same as a standard dry hose.
Q. Can I use a dust bag when collecting water?
No. Dust bags are for dry pickup. Wet-and-dry machines must be configured for liquid collection as directed in the machine instructions, including the correct float, filter and floor-tool arrangement.
Q. Which parts are specific to Numatic George GVE370?
George uses model-specific extraction components, including the suction-and-solution hose, liquid delivery parts and extraction tools. Dry-mode bags and filters also need to match the GVE370 specifications. Do not substitute an ordinary dry hose for the extraction assembly.
Q. Can I use a general Numatic filter in a hazardous-dust or HEPA model?
No. H-Class, hazardous-dust and specialist HEPA machines require the exact approved filtration, bag and sealing components. Using an ordinary filter can compromise the machine’s intended containment and compliance.
Q. What is the difference between original Numatic and compatible parts?
An original Numatic part is supplied under the Numatic brand. A compatible part is an alternative made for the models stated on its product page. Check how the product is identified, supported models, included pieces and any fitting limitations.
Q. Can I replace a Numatic motor or electrical part myself?
Motors, switches, leads and internal electrical components require exact technical matching and safe installation. Electrical repairs should be completed by a suitably qualified repairer. Review the vacuum service and repair information when the fault is uncertain.
Q. What information should I send for Numatic part matching?
Send the complete model number, bag or part code, filter diameter, tool connection measurement and clear photos of the rating label, old part and both connection points. State whether the machine is being used for dry, wet or extraction work.
Q. Can cleaning businesses order Numatic bags and filters in bulk?
Yes. Contact Janitorial Depot with the Numatic models, bag codes, filter types, pack quantities and expected order frequency to discuss bulk packs and recurring consumable supply.
Q. Can Numatic spare parts be collected or delivered?
Confirmed orders can be collected from Janitorial Depot in Cranbourne West. Available delivery options are shown at checkout and may vary for bulky items, batteries and restricted electrical products.